By RYOBI NATION FEATURED CREATORS
easy
Host a Valentine's themed get together with this easy-to-make Heart Charcuterie Board β€οΈπ Created by @bourntocreate
Tools
- 18V ONE+ HP Brushless Jig Saw
- 18V ONE+ Precision Craft Rotary Tool
- 18V ONE+ 5" Random Orbit Sander
- 18V ONE+ HP Brushless 1/2" Drill/Driver
Accessories
- 7 PC. 5" RANDOM ORBIT SANDER SAND PAPER
- SMOOTH FLAME MATERIAL REMOVAL BURR
Materials
- 1'x3' Select Pine Wood
- Design Template
- Torch Paste
Steps
STEP 1
Cut a piece of high quality wood to desired size. Use a spray paint cup to outline a curved edge on each of the corners of the board.
STEP 2
Trace a heart shape onto a cutting board.
STEP 3
Use a drill bit with a diameter around the size of a jigsaw blade to drill a hole in one of the corners of the heart.
Tools
Drill/Driver
STEP 4
Use a jigsaw to cut the rounded edges on the board and cut out the heart shape.
Tools
Jigsaw
STEP 5
Use a rotary tool and a smoothing burr to refine the heart shape.
Tools
Rotary Tool
STEP 6
Use a sander to smooth any rough edges on the charcuterie board.
Tools
Random Orbit Sander
STEP 7
Use a sanding pad to refine and smooth the heart cutout as needed.
STEP 8
Apply burning stencil paper with heart shapes to the Heart Charcuterie Board. Cut out the heart shapes, then outline each.
STEP 9
Use a heat gun to activate the burning material.
Tools
Heat Gun
STEP 10
Apply danish oil to the board to finish.
